Try Odoo
AV G1000 Setup Guide
Relates to all G1000 models: AV GDU 1044B / 1040A / 1040
CABLE CONNECTIONS - (ports available at the back of the devices)
- USB *
Connect to the USB port on your PC. - DVI
Use the included DVI to HDMI cable to connect this port to the HDMI port on your PC - VGA
Not used. - PWR IN (or POWER on the first generation)
Connect the provided PSU adapter. - PWR OUT
If you have a second G1000 device, please use the provided jumper cable to connect this port with the PWR IN port on the second device.
TURNING ON
There is no power switch on this device. Just plug in all the cables and you are ready to go.
The backlight of the device should turn ON as soon as it detects that the USB cable is connected to the PC.
It should turn OFF when you power off your PC. If the backlight stays ON after you shut down the PC, it means that your PC is providing USB power even when it's off. Usually this can be disabled in BIOS.
Although you can leave the device always plugged in to power, we highly recommend to unplug the power when not used.
It's not only better for the device, it's also better for the environment!
AVIATEK CONNECTOR
Now you need to install the Aviatek Connector in order to use the device/s with the flight simulator of your choice.
You can find the latest version of Aviatek Connector here:
PFD? MFD?
If you ordered a set mounted on a desktop stand, then it will come preconfigured correctly. However if that's not the case or you would like to change the setting. please refer to the below article to find out how to configure your G1000 to work either as a PFD or MFD: