Touch screen setup
Try Odoo

Touch screen setup


In order to use the touch screen in your AV G1000 unit there is some extra configuration in Windows required as there is no physical connection between the displays and touch panels. Please follow the steps below to set it up.


  1. Connect the USB cable to the port which says "TOUCH".
  2. Now you need to tell Windows which of your touch panels is used on which display:
    1. Go to Windows Settings.
    2. Search for "Calibrate the screen for pen or touch input" and press "Setup" in the top of the window.
    3. It will show a text on one of your displays. 
      If it's not shown of any of your touch G1000 units, then press enter so it skips to the next display.
      If it's shown on your G1000 display, then touch this display and Windows will associate this display with this touch panel.
      Repeat for all screens. 
    4. That's it! Your touch panels are ready to use!


You can also have a look at the following YouTube tutorial showing the calibration process:
How to Setup/Activate Your Touchscreen Monitor | Windows 10